Filter
Top Products
– 2 –
Charging the battery
Place the handset on the charger and charge for
6 hours before initial use.
• The unit beeps once, the CHARGE indicator
lights and “Charging” is displayed.
• When the battery is fully charged, “Charge
completed” is displayed if there are no new
calls in the Caller List.
• Recharge the battery when:
—“Recharge battery” is displayed on the
handset,
—“
3” flashes, or
— the handset beeps intermittently while it is in
use.
• If the battery has been discharged, the handset will display “Charge for 6 HRS” and
“
4” when you place the handset on the charger. The handset will not work unless the
battery is charged. Continue charging.
Handset battery information
After your Panasonic battery is fully charged, you can expect the following performance:
• Clean the charge contacts of the handset and the charger with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or high
humidity. Otherwise the battery may not charge properly.
Belt Clip
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip To remove the belt clip
Operation Operating time
While in use (TALK) Up to 5 hours
While not in use (Standby) Up to 11 days
While using the Clarity Booster feature Up to 3 hours
Charge Contacts
CHARGE Indicator
B
A
While pressing the top of the clip (1),
pull the right edge in the direction of the
arrow (
2).
TGA650.fm Page 2 Wednesday, July 13, 2005 3:16 PM