Filter
Top Products
32
†
3. Press Transfer again or replace the
handset before the extension answers.
This starts the recall timer
Note: If the person to whom the call is
transferred answers, the recall timer stops.
If the transferred call is not
answered, your telephone rings:
1. Lift the handset or press a DN Key.
You are connected to the original
caller. The extension to which you
transferred the call will continue to
ring.
†
2. Press Transfer and repeat the transfer
(to a different DN), if desired.
If the person to whom you are transferring the call answers while you are on the
line, a conference call is set up between the three of you. Replace the handset or
press Release to complete the transfer. Check with your system administrator
about the length of your recall timer.
Auto Dial Transfer
Auto Dial Transfer allows you to use your Auto Dial Key to transmit digits to the
central office after a Trunk Switchhook Flash. You must be on a central
office/exchange (CO) trunk call from or to a CO which offers Centrex- or
exchange line-type features.
To use Auto Dial Transfer when you
pick up an incoming trunk call:
1. Press Trunk Switchhook Flash and
wait for interrupted dial tone.
ç
2. Press Auto Dial to call the number
desired.
3. Replace the handset or press Release
to end the call.
Trunk Switchook Flash
During a call: Timed Reminder Recall - Auto Dial Transfer