Filter
Top Products
Plan the Interface
PN: 1725-36138-001_E.doc
11
SpectraLink 6100 MCU
For the SpectraLink 6100 MCU, the handset function menu text can
only be changed via remote configuration through the services of
Polycom’s Customer Support.
SpectraLink 8000 Telephony Gateways
Function menu text options can be changed in the Administration
Console of the SpectraLink 8000 Telephony Gateways.
Hold
The Hold feature should be programmed to the Hold key as shown
on the key-map diagrams so that when the
Hold key or softkey is
pressed on the handset, the call is placed on hold.
Mute
The handset Mute function is hard-coded to FCN +1 on the PTB4xx
handset. This function sequence is recommended, but the system
administrator can assign the Mute function to any available function
key sequence or leave the function unassigned. The SpectraLink 6000
and SpectraLink 8020/8030 Wireless Telephones use a
Mute softkey.
Speakerphone
If a handset such as the PTB 4xx has no speaker, the SPKR and ANS
keys on the ETJ-16DC-2 are not mapped to keys on the handset.
Ring types
Handset ring types (soft, normal, vibrate, etc.) are programmed by the
handset user and are not accessible or changeable by the system
switch. Whenever possible the audible ringer on the handset will
follow the cadence provided by the system switch. Call progress tones
provided by the host system will be passed through to the handset.