Filter
Top Products
Deploying SpectraLink 8020/8030
Wireless Telephones
May 2009 Best Practices Guide
16
©2009 Polycom, Inc. All rights reserved.
Polycom and the Polycom logo are registered trademarks of Polycom, Inc. All other trademarks are the property of Polycom, Inc. or their respective companies.
Wi-Fi AP
call server
SVP Server
SpectraLink e340/h340/i640
Wireless Telephone
PSTN
WLAN Controller
TFTP Server
(Download handset software)
Wi-Fi AP
Connect to
either PBX or
call server
PBX
Telephony Gateway
Ethernet Switch
Figure 4 – Physi al Connections
.2 Assigning IP Addresses
client devices and therefore require IP addresses to operate in the
ickly
elephony Gateways and SVP Servers also require IP addresses that can be obtained by either static or
c
3
SpectraLink handsets operate as LAN
network. IP addresses can be assigned statically through the configuration menus on the handsets or
dynamically using standard DHCP protocol. The Handset Administration Tool (HAT) can be used to qu
load and change administration options in the handsets, including static IP addresses. For dynamic IP
addressing, a DHCP server is required.
T
DHCP address assignment. It is always recommended to configure production infrastructure components
with static IP addresses to ensure consistent system access. When using one or more SVP Server(s), (see
Section 4.1.3) the Registration SVP Server must be assigned a static IP address. The Registration SVP
Server is identified by DHCP option 151 to the wireless telephones.