Filter
Top Products
97
SSeettttiinnggss
96
SSeettttiinnggss
Change Password
The Change Password feature allows you to change your
current phone password to a new one. You must enter
the current password before you can specify a new one.
The password is factory set to 0000. Once you have
entered a new password, you are asked to confirm it by
entering it again.
SIM Lock
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock
code.
Once you have entered the lock code, you are asked to
confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
FDN Mode
The FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available.
Enable: you can only call phone numbers stored in the
phonebook. You must enter your PIN2.
Disable: you can phone any number.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, refer to the Change PIN2 menu
option on page 98.
Note: Before disabling the PIN Check feature, you must
enter your PIN.
The following options are available.
Enable: you must enter the PIN each time the phone is
switched on.
Disable: the phone connects directly to the network
when you switch it on.
To change your PIN, refer to the Change PINmenu
option below.
Change PIN
This feature allows you to change your current PIN to a
new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you can
specify a new one. Once you have entered a new PIN,
you are asked to confirm it by entering it again.
Phone Lock
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 4-digit phone password
each time the phone is switched on.
The password is factory set to 0000. To change the
phone password, refer to the Change Password menu
option on page 97.
Once the correct password has been entered, you can
use the phone until you switch it off.
The following options are available.
Enable: you are required to enter the phone password
when you switch the phone on.
Disable: you are not asked to enter the phone
password when you switch the phone on.