Filter
Top Products
WAP
140
Data call type: select a network connection type;
ISDN
or
Analogue
.
Dial number: enter the PPP server phone number.
Login ID: enter the PPP server login ID.
Password: enter the PPP server password.
GPRS setting
: you can change the proxy settings
for the GPRS network.
Gatewa
y: enter the IP Address and IP Port.
APN: enter the access point name used for the
address of the GPRS network gateway.
Login ID
: enter the user ID required to connect to
the GPRS network.
Password
: enter the password required to connect
to the GPRS network.
Home URL
: you can change the address of your
startup homepage.
When the default homepage displays, you can
delete it using the
C
key and enter your own choice.
To enter any special characters, / for example, use
the Symbolic mode; see page 49.
Bearer
: you can select the bearer to be used for
each type of network accesses.
GPRS first
: your phone will search for the GPRS
network first. If this service is not available, you can
set the GSM service temporarily.
GPRS only
: the phone only works in GPRS
networks.
GSM only
: the phone only works in GSM networks.