Filter
Top Products
Menu functions
Messages
(Menu 5)
59
-
Connect to POP3 server first
/
Connect to
IMAP4 server first
: connect to the POP3 or
IMAP4 server for authentication before
connecting to the SMTP server to send e-mails.
-
Protocol type
: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is
POP3
:
-
POP3 server
:
enter the IP address or host name
of the server that receives your e-mail.
-
POP3 port
: enter the POP3 port number.
-
User ID
: enter the POP3 user name.
-
Password
: enter the POP3 password.
-
User SMTP authentication
: enable SMTP
authentication, which requires the user to login
before sending e-mails.
-
Same as POP3
: select if you want the SMTP
server to have the same parameters as the POP3
server.
-
SMTP user ID
: enter the SMTP user name.
-
SMTP password
: enter the SMTP password.
-
APOP login
: connect to the server by using the
APOP login scheme.
-
Secure connection
: use a secure connection for
the e-mail service.
When the protocol type is
IMAP4
:
-
IMAP4 server
: enter the IP address or host
name of the server that receives your e-mail.
-
IMAP4 port
: enter the IMAP4 port number.
-
User ID
: enter the IMAP4 user name.
-
Password
: enter the IMAP4 password.
-
User SMTP authentication
: enable SMTP
authentication, which requires the user to login
before sending e-mails.
-
Same as IMAP4
: select if you want the SMTP
server to have the same parameters as the
IMAP4 server.
-
SMTP user ID
: enter the SMTP user name.
-
SMTP password
: enter the SMTP password.
-
Include attachments
: select this option to
receive attachments with e-mails.