Filter
Top Products
53
using tools and applications
Search for and connect to a WLAN
1. In Menu mode, select Wi-Fi → Search.
2. Select a network icon → Connect and add a
connection profile.
3. In Menu mode, select Internet or Communities,
or in Idle mode, select a web-based widget.
4. Select and drag a network icon into the centre (if
necessary).
Your phone connects to the network using the
connected WLAN profile.
To connect to a WLAN using a WPS (Wi-Fi
Protected Setup) access point,
1. In Menu mode, select Wi-Fi → Search.
2. Select a WPS icon ( ) and select Add.
3. Select WPS push button or WPS enter PIN
depending on the AP device type.
4. Select Start and press a WPS button on the AP
device within 2 minutes.
Or, enter a PIN on the AP device and select Start
within 2 minutes.
• If the network you want needs an IP address,
subnet mask, DNS, or gateway information,
select
Advanced settings
.
• The WLAN security should be set as the
selected network configuration.
To access the internet via another method,
change the connection profile to the desired
method.
S3653W_East Asia English-03.fm Page 53 Friday, December 4, 2009 6:05 PM