![](http://pdfasset.owneriq.net/2/83/2830d908-bc16-d114-c56d-bb0513c49cf1/2830d908-bc16-d114-c56d-bb0513c49cf1-bg44.png)
ENGLISH
68
Troubleshooting
Troubleshooting
✤ Before contacting a service center, perform the following simple checks. They might save you the time and
expense of an unnecessary call.
Self Diagnosis Display
Display Blinking Inform that... Action
slow
the battery pack is almost Change it to a charged
discharged one.
fast
the battery pack is fully Change it to a charged
discharged. battery.
TAPE END! slow
the tape has almost reached
Prepare a new one.
its end.
TAPE END! no the tape reached its end Change to a new one.
TAPE! slow there is no tape in the camcorder. Insert a tape.
PROTECTION! slow
the tape is protected If you want to record,
from recording. release the protection.
D.EMG slow the camcorder has some 1. Eject the tape.
C.EMG mechanical fault. 2. Set to OFF
R.EMG 3. Detach the battery.
L.EMG 4. Reattach the battery.
* Please contact your local authorized
service center if the problem
continues.
slow
moisture condensation
see page 71.
has formed in the camcorder.