Filter
Top Products
Settings 67
–
Lock Phone
: Choose Lock or Unlock to control lock mode manually, or On
Power Up to have the phone lock automatically when turned on. Follow on-
screen prompts to unlock the phone in Standby mode.
–
Change Lock
: The default Lock Code is the last four digits of your phone
number. Use Change Lock to reset the Lock Code to a four-digit code of your
choice.
–
Emergency #
: Enter numbers that can be dialed while in Lock Mode. Default
emergency numbers are provided.
–
Reset Phone
: Changes all settings except Contacts to the defaults. The
phone will restart automatically after the reset.
–
Erase All Entries
: Deletes all entries you’ve made to the phone, including
Contacts.
–
Restriction
: For Incoming and Outgoing Calls, you can Allow All, Allow
Contacts (to allow only calls to/from numbers stored in Contacts), or Allow
None. For SMS Messages, MMS Messages or Data, you can Allow All or
Allow None.
• NAM Selection
— Set your preferred system, NAM1 or NAM2. Contact
your Wireless Provider for more information. Changing this setting
causes your phone to automatically restart.
Important!:
If you do the following, you won’t be able to access your phone, and
you will be required to call the Service Center to unlock your phone.
– Set
Lock Phone
to
On Power Up
– Change the
NAM Selection
setting without a number programmed
into
NAM2
.
• System Select
— Select Home Only to restrict your phone to your home
network, or Automatic to allow roaming.
r100.book Page 67 Monday, November 30, 2009 10:40 AM