Filter
Top Products
188
Section 10
Changing the WAP Profiles
You can set up 10 server profiles for the WAP browser.
1. In Idle mode, press the Menu ( ) soft key to access
Menu mode.
2. Select Settings. Highlight Connection Settings and
press the Select soft key or the key.
3. Select the profile you want.
The following options are available:
• Profile Name: enter a name that you wish to assign to the
HTTP proxy server.
• Homepage URL: set the address of your startup homepage.
When the default homepage displays, you can delete it using
the
key and enter your own choice.
• Bearer: select the bearer to be used for each type of network
address accessed: GPRS or DATA. The remaining options
depend on the Bearer setting.
When the bearer is set to GPRS:
• Proxy Setting: enter the WAP gateway address required to
connect to the Internet.
• User Name: enter the User ID required to connect to the
GPRS network.
• Password: enter the password required to connect to the
GPRS network.
• APN: enter the access point name used for the address of
the GPRS network gateway.
• Proxy Status: allows you to activate and deactivate the
proxy status.
When the bearer is set to Data: