Filter
Top Products
72 73
The audio quality of the call is poor
Check the signal strength indicator ( ) on the display; the
number of bars indicate the signal strength from strong
( ) to weak ( ).
Try extending the antenna, moving the phone slightly or
moving closer to window if you are in a building.
No number is dialed when you recall a memory location
Check that the numbers have been stored correctly, by using
the memory scan feature (See page 33).
Re-store them in the memory, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG
Authorized Service Center.
Miscellaneous
Miscellaneous
Cumulative call time is cleared
All the phone numbers stored
in memory are cleared.
There is no phone number
stored in memory.
While the phone is restricted,
you have tried to make an
international call beginning 00.
You have entered invalid or no
time.
All the phone numbers in redial
memory are cleared.
The memory location you chose
is empty.
The phone number is not
registered in the base station.
There is no empty location
under which you can store
phone numbers.
While the phone is restricted, you
have tried to make a call by
memory dial.
A phone number is already
stored in the selected memory
location.
LCD Messages
AIR TIME IS
CLEARED
ALL MEMORIES ARE
CLEARED
ALL MEMORIES ARE
EMPTY
INT.CALL IS
RESTRICTED
INVALID TIME
LAST CALLS ARE
CLEARED
LOCATION EMPTY
MAINTENANCE
REQUIRED
MEM. (00-89) IS
FULL
MEMORY IS
RESTRICTED
MEMORY USED!
STORE? YES