To insert the memory card and the SIM card
•
Turn off your phone and remove the back cover, then insert the memory card
and the SIM card into the relevant slots.
The memory card may not be included at purchase in all markets.
To attach the back cover
1
Place the back cover over the back of the device, then press down on the top
corners to lock them into place.
2
Moving from top to bottom, press down the sides of the cover. The clips on the
inside of the cover make clicking noises as they lock into place.
Turning the device on and off
To turn on the device
1
Press and hold down the power key
until the device vibrates.
2
If your screen goes dark, briefly press the power key to activate the screen.
3
Enter your SIM card PIN when requested, then tap .
4
If your screen is locked, place a finger on the screen and swipe up or down to
unlock it.
5
Wait a while for the device to start.
Your SIM card PIN is initially supplied by your network operator, but you can change it later
from the Settings menu. To correct a mistake made while entering your SIM card PIN, tap
.
9
This is an Internet version of this publication. © Print only for private use.