Filter
Top Products
55 GB
Getting
Started
Your Sony
CMD-Z7
Basic
Operation
Menu
Operation
Appendix
N
o
t
f
o
r
C
o
m
m
e
r
c
i
a
l
U
s
e
S
o
n
y
E
r
i
c
s
s
o
n
M
o
b
i
l
e
C
o
m
m
u
n
i
c
a
t
i
o
n
s
A
B
The browser can be configured to access
WAP or HTML sites. The procedure to set up
the configuration depends on the server type.
See an example for WAP below.
1 Select WAP from the Main Menu (or
press the Jog Dial backward from standby
mode to access the Applications Menu).
Then select Settings.
2 Select the first field labeled Empty and
then select Edit.
3 Enter the Security Code (default 0000) at
the prompt (see also page 39).
4 Select Name to enter a name that will be
displayed for your site.
Name: My Provider
5 Select Home Page to enter the URL of the
home page specified by your Network
Operator/Service Provider.
Home Page: wap.myprovider.com
6 Select Server Type to select WAP or
HTML depending on which type of server
your provider has.
Server Type: WAP
7 Select Bearer Service to specify the
bearer type (Data or SMS) your Network
Operator/Service Provider requires.
Bearer Service: Data
8 Select Provider to set the following
parameters specified by your Network
Operator/Service Provider:
Dial Up Number: +12 345 67 890
(number to access the gateway)
ISP User Name: abc
ISP Password: sony
Data Call Type: Automatic
9 Select the arrow to return to the Edit
menu.
10 Select GW Server to enter the address of
the gateway server of your Network
Operator/Service Provider.
GW Server: 10.255.255.255
11 Select Security to choose On for a secure
connection to your gateway (GW port
9203) or Off for a non-secure connection
(GW port 9201) depending on your
Network Operator/Service Provider.
01GB01COV-AE4.book Seite 55 Montag, 25. Februar 2002 3:09 15