Filter
Top Products
Installation
10 Fixed Wireless Terminal: G30 and G35 models
2. Remove the front cover, by pressing down and pushing the small tab
that is in the center of the bottom part of the FWT. Open the SIM
Card holder and insert the SIM Card.
3. Close the SIM Card holder, placing it horizontally and securing it with
the sliding part of the holder.
4. Install the battery (optional) in the battery compartment (over the SIM
Card). To do so, connect the battery cable to the FWT connector.
Connect the black cable to the negative pole (-) of the battery and the
red cable to the positive pole (+). Fit the cable under the holding tab
(over the SIM Card) and insert the battery until the tab fixates it.
5. Replace the front cover.
Connecting a telephone to the FWT
Connect an analog telephone to the line interface (RJ11) of the FWT.
Important: You may have to use this telephone to enter the PIN
code.