Filter
Top Products
White Paper J200
45 November 2004
User interaction with SIM AT
Display text
Text of up to 240 characters (120 UCS2 coded) is
supported.
Text clearing times are 10-20 seconds. 60-second
time-out limit for the user to clear the text.
‘Key’ responses:
• ‘Long NO’ – Proactive session terminated by
user.
• ‘NO’ – Backward move in proactive session.
• Any other key clears display if the command is
performed successfully.
Get inkey
Prompt for a one-character input. Pressing ‘YES’
without entering a character gives warning mes-
sage “Minimum 1 character”.
‘Key’ responses:
• ‘CLR’ clears current character.
• ‘Long NO’ terminates the proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
Get input
Prompt for character input. Pressing ‘YES’ without
entering a character gives warning message
“Minimum ‘no.’ characters”. The phone will refuse
to accept further input when the maximum
response length is exceeded.
MMI Maximum Response lengths:
• Digits Only – 160 characters
• SMS default alphabet characters – 160 charac-
ters
• Hidden Characters (digits only) – 11 characters
‘Key’ responses:
• ‘CLR’ clears current character/characters.
• ‘Long NO’ terminates the proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
Refresh
When a Refresh - SIM Reset command is ececuted
by the phone, it displays the message “Please
wait” and then restarts.
Subaddress DTMF support Yes
'00' = set up call, but only if not currently busy on
another call
Yes
'01' = set up call, but only if not currently busy on
another call, with redial
Yes
'02' = set up call, putting all other calls (if any) on
hold
Yes
'03' = set up call, putting all other calls (if any) on
hold, with redial
Yes
'04' = set up call, disconnecting all other calls (if any) Yes
'05' = set up call, disconnecting all other calls (if any),
with redial
Yes
SET UP IDLE MODE No
SET UP MENU Yes
SMS PP DOWNLOAD Yes
Service Mode Support in
J200