Filter
Top Products
White Paper Z300
47 October 2005
User interaction with SIM AT
Display text
Text of up to 240 characters (120 UCS2 coded) is
supported.
Text clearing times are 10-20 seconds. 60-second
time-out limit for the user to clear the text.
‘Key’ responses:
• ‘Long NO’ – Proactive session terminated by
user.
• ‘NO’ – Backward move in proactive session.
• Any other key clears display if the command is
performed successfully.
Get inkey
Prompt for a one-character input. Pressing ‘YES’
without entering a character gives warning mes
-
sage “Minimum 1 character”.
‘Key’ responses:
• ‘CLR’ clears current character.
• ‘Long NO’ terminates the proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
Get input
Prompt for character input. Pressing ‘YES’ without
entering a character gives warning message
“Minimum ‘no.’ characters”. The phone will refuse
to accept further input when the maximum
response length is exceeded.
MMI Maximum Response lengths:
• Digits Only – 160 characters
• SMS default alphabet characters – 160 charac-
ters
• Hidden Characters (digits only) – 11 characters
‘Key’ responses:
• ‘CLR’ clears current character/characters.
• ‘Long NO’ terminates the proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
Refresh
When a Refresh - SIM Reset command is ececuted
by the phone, it displays the message “Please
wait” and then restarts.
Select item
Scroll to highlight item for selection. The maximum
number of items supported by the phone within
one Select Item command is 30.
‘Key’ responses:
• Down arrow – Scroll down list.
• Up arrow – Scroll up list.
• Long ‘NO’ terminates proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
Send short message
Default message “Sending message, please wait”
can be replaced by the Alpha Identifier text, or sup
-
pressed completely if a null text is provided.
Responses are “MESSAGE FAILED” or “MESSAGE
SENT”.
‘Key’ responses:
• Long ‘NO’ or ‘NO’ terminates the proactive ses-
sion.
Set up call
If the ME is on a call when the command 'Set up
Call, putting all other calls on hold' is sent, the user
sees the text 'Setting up a call current call will be
held'.
'05' = set up call, disconnecting all other calls (if any),
with redial
Yes
SET UP IDLE MODE No
SET UP MENU Yes
SMS PP DOWNLOAD Yes
Service Mode Support in
Z300