Filter
Top Products
5
English
Create a EDGE/GPRS
or CSD connection
1. From Wireless Manager select .
2. Check the box next to Create a new
connection, enter a name for the
new connection, for example
‘My Connection’, and click Next.
3. Select the type of data connection
you require. Choose from:
• GPRS/EDGE (General Packet
Radio Service/Enhanced Data rates
for Global Evolution)
• CSD (Circuit Switched Data)
4. Select your Network Operator from
the drop down list at the bottom of the
screen. If your Network Operator is
not listed select <Other>. Click Next.
Note: The correct parameters for
connection to the Network
Operator you select from the list
are automatically entered for you.
See GPRS/EDGE subscription or CSD
subscription sections below to enter APN
or Dial-in number, User ID and Password.
GPRS/EDGE subscription
If your Network Operator isn’t listed you
will need to contact them and get the
following parameters.
1. Select <Other> for the network
operator and enter the requested
information when prompted.
2. Click the Advanced... button to enter
the DNS.
CSD subscription
If your Network Operator is not listed you
will need to contact them and get the
following parameters.
Select <Other> for the network operator
and enter the following information when
prompted.
• Dial-in telephone number.
• User ID and password, if required.
3
Creating a connection