Filter
Top Products
4 Sprint Worldwide Wireless Service
2. Remove the battery if it is installed. To remove, lift out the battery from the groove at the
upper right side of the battery compartment.
3. To remove the SIM card, first insert the tip of the
stylus into the small hole above the SIM card
slot, and then push the SIM card out with the
stylus. Slide the SIM card out from the slot with
your thumb or finger.
4. Press the
Power button to turn the device on.
Ⅲ Your device will turn on, search for Sprint
service, and then enter standby mode.
Ⅲ If your device is not yet activated, see the
“Activating Your Device” section of the HTC
Touch Pro2 User Guide for more information.
Ⅲ By default, your device is set to Global mode.
If there is no SIM card on your device, your
device will display a message to inform you
that it will switch to CDMA mode.
Note
Your device’s battery should have enough charge to turn on, find a signal, set up your voicemail,
and make a call. You should fully charge your battery as soon as possible. See the “Charging the
Battery” section of the HTC Touch Pro2 User Guide for details.
Groove
Removing the SIM Card