Filter
Top Products
End-User Reference Guide
Polycom SpectraLink 8002 Handset Provides SIP Wireless Mobility on Strata CIX
7 of 10
End-User Reference Guide
CIX Setup
• Verify CIX program 250 FK13 = RFC2833 for DTMF [note: CIX default setting for new SIP extensions
that support RFC2833 only].
TFTP Server Setup
Important! The 8002 requires that a TFTP Server be running at all times for handset registration and
firmware upgradability. Toshiba has approved the free-of-charge SolarWinds TFTP
Server, which can be downloaded from their website (www.solarwinds.com). However,
almost any TFTP Server can be used. The TFTP Server can be run on the Toshiba MAS
or on a separate server.
1. Click File > Configure.
2. Click the General tab, and then
specify whether to start the
server (shown right).
3. If you want the TFTP server to
appear in the task tray, check
Add TFTP Server to Windows
task tray
4. Specify a directory to use as the
root directory of the TFTP
server. Files received by the
TFTP server are saved here.
Files to be sent by the TFTP
server must be first copied to
this directory.
5. Click the Security tab, then
select the actions you want to
allow the TFTP server to
perform. For example, click
Receive files if you want to
restrict the server to only
receiving files.
6. If you want to restrict the TFTP
server functions to a specific IP address range, click Add and then specify the beginning and ending IP
addresses of the range. Then, click OK.
7. Click OK.
Note TFTP protocol has no innate security. There are no passwords or authentication. SolarWinds TFTP
Server adds security by allowing you to limit the server's functionality and specify a range of IP
addresses from which to accept requests.