Filter
Top Products
25
Transferring a Call
Your cordless phone allows you to transfer outside calls from one handset to another. Only one handset at a
time can talk with an outside caller. While one handset is in use, other handsets cannot go off hook to listen to
conversations or make an outgoing call.
To transfer a call
1) During a call, press [delete/transfer]. The call will automatically be placed on hold.
2) For 2-handset model: The transfer tone sounds.
For 3/4-handsset model: Press a number key (
[1] - [3] for 3-handset model, [1] - [4] for
4-handset model) to select from the Handset No. You can page all handsets by pressing
[0]. The transfer tone sounds.
3) When the other handset receives the call, the transfer tone stops.
To cancel the transfer and return to the caller, press [delete/transfer] or [talk/ash] on the handset.
To receive a transfer call
Pick up the handset from the cradle (when AutoTalk is set to on), or pick up the handset
and press [talk/ash] to answer the transferred call. Additionally, you can also answer the
transferred call by pressing any number key, [ /tone/ ] or [#/ ] (when AutoTalk is set to on).
Note: If you transfer a call and it is not picked up after ve minutes, the call will be disconnected.
(HS1 display on
4-handset model)
Select Handset
Number :2 3 4
All :0
(HS1 display on
4-handset model)
Select Handset
Number :2 3 4
All :0
Call TransferredCall Transferred