Filter
Top Products
Getting Started
Mounting the Charging Cradle
Mount the Charging Cradle to either a counter or wall.
To counter:
Attach the Charging Cradle using the mounting
screws and washers as follows.
To wall:
Apply the Charging Cradle to the wall and insert
the two mounting screws into the larger holes of
the Charging Cradle.
Push down the Charging Cradle until it is firmly seated.
When you remove the Charging Cradle from the
wall, loosen the screws and push the Charging
Cradle up.
Attaching the Antenna
Apply the antenna to the radio as shown.
Be sure the antenna is firmly seated.
Attaching the Rechargeable
Battery Pack
Place the rechargeable battery pack onto the
back of the radio. It will only fit in one way.
Snap the battery release clip until it clicks.
Be sure the battery pack fits tightly against
the body.
2
1
8
UT919ZH(MHS350)ENG.QX 2/16/04 10:14 AM Page 8