Filter
Top Products
3
Installing the Battery
Use only the Uniden BT-446 rechargeable battery pack supplied
with your cordless telephone.
Installing the Belt Clip
Insert the tabs on the sides of the belt clip into
the holes on either side of the handset. Press
the belt clip down until it clicks into place. (Tug
on the clip to make sure it’s secure.)
To remove the belt clip, gently pull the tabs out
of the holes, then slide the belt clip off of the
handset.
Battery
pack
Battery
cover
Handset
Locate the battery
pack, battery cover
and the handset.
Push the battery pack connector
in firmly. (You should hear it click
into place.) Gently tug on the
battery wires to make sure the
connection is secure.
Place the cover over the
battery compartment and
slide it up into place.
Line up the red and black
wires on the battery pack
connector with the sticker in
the handset’s battery
compartment.
Battery
pack
Battery
cover
Handset
Locate the battery
pack, battery cover
and the handset.
Push the battery pack connector
in firmly. (You should hear it click
into place.) Gently tug on the
battery wires to make sure the
connection is secure.
Place the cover over the
battery compartment and
slide it up into place.
Line up the red and black
wires on the battery pack
connector with the sticker in
the handset’s battery
compartment.