8 CHAPTER 1: OVERVIEW
Installation Checklist This section contains a checklist for installing software and booting a NETBuilder II
system with a DPE module.
Install System Software and Boot — See Chapter 2.
Change the Primary Boot Source — See Chapter 3.
Configure Basic Settings — See Chapter 4.
Configure Specific Services for Your Network — See Using Enterprise OS
Software and Reference for Enterprise OS Software.
❑ Install software from a flash memory card.
❑ Change the primary boot source default as needed.
❑ Log on to the system.
❑ Familiarize yourself with the command-line or menu-driven user interface (UI),
storing configuration parameter values, and getting help.
❑ Obtain Network Manager privilege level.
❑ Change the Network Manager password.
❑ Adjust the time and date if necessary. Time and date are preset and may need
to be adjusted for your time zone.
❑ Set system administrator information:
❑ System name and location
❑ System contact name and phone number
❑ Login banner
❑ Assign IP addresses/subnet masks to individual ports or one address to
the system.
❑ Set up the bridge/router for SNMP.
❑ Set up system security.
❑ Use the browser-based Web Link application for further configuration.
