3Com S330 Manual

A SERVICE OF

next previous

Configuring the Ethernet Interface 113

Figure 84 Manage Bridge Menu

2 From the Manage Bridge menu, select [1] Bridge Conﬁguration to display the

Bridge Conﬁguration menu, shown in Figure 85. The current aging timer setting is

displayed below the menu title (3 minutes in the sample menu shown in the

ﬁgure).

Figure 85 Bridge Conﬁguration Menu

3 Select [1] Set Aging Timer. The following prompt appears at the bottom of the

screen:

Enter Aging Timer (minute):

4 Enter the desired timer interval, in minutes.

5 Select [2] Previous Menu to return to the Manage Bridge menu.

6 From the Manage Bridge menu, select [2] Ethernet Slot #6 Port 1 to display the

Bridge Menu for the Ethernet port, as shown in Figure 86.