6 Physical Characteristics
Hardware interfaces
both numerically and graphically. This is explained in further detail in
Chapter 2, “The Display and keypad”).
Hardware interfaces
The Hardware Interface Panel, shown in Figure 1- 4, is located under a
hinged cover in the base of the instrument. The cover can be lifted by a tab
at one side, and snapped shut again by closing and pressing firmly at the
center.
Figure 1-4: Hardware Interface Panel
Memory card slot
A Secure Digital (SD) removable memory card is shipped with each
SoundPro SE/DL instrument. The card should always be in place when you
are operating the instrument. More information about operating with the
memory card is given under “Memory card” on page 106.
NOTE: You must use a compatible SD card. For information about
replacing the SD card, see “Compatibility” on page 117.
USB port
A USB cable is shipped with each SoundPro SE/DL instrument. One end fits
the mini B port in the instrument. The other end fits a standard USB
connector on a personal computer. A USB connection to a personal
computer allows files to be transferred, settings to be downloaded to the
instrument, and post- session analysis to be performed in the computer using
data files created in the instrument.
