14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 6415
15” Fanless Panel PC
" Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.
5.3 Turn off the Power
WARNING:
Failing to turn off the system before opening it can cause permanent damage to the
system and serious or fatal injury to the user.
Before any maintenance procedures are carried out on the system, make sure the sys-
tem is turned off.
5.4 Opening the System
5.4.1 Removing the Back Panel
To access the PC Series-N270 internally the back panel must be removed. To remove
the back panel, please follow the steps below.
Step 2: Follow all anti-static procedures. See Section 5.2.
Step 3: Turn off the power. See Section 5.3.
Step 4: Remove the retention screws on the back. Remove the retention screws (Fig-
ure5-1) from the rear panel.
