© Adam Equipment Company 2005 5
• Position the height measuring rod and secure it by fixing its threaded
end.
• Connect the adapter power supply to the main power supply and put
the switch at the rear of the scale to ON.
6.0 FUNCTION
6.1 WEIGHING
• Place the Physician Scale on an even floor and press the [On/Off] key.
• The instrument performs a self-test after which it is ready for operation.
The display will show “
SCALE
”, “
250.00
” (Capacity), “
Ur x.xx
” (the
software revision number), “
10.0.0.0.0
”, “
DC. 6.00
” (the voltage of the
battery) and then will show “
0.0000
” with an arrow symbol, indicating
the last chosen unit (kg or lb).
• Press the [On/Off] key for 2 or 3 seconds and the machine switches
off. If the machine is not to be used for a long time, the main power
switch shall be turned off.
• The scale has a back-light which is switched on every time the scale is
turned on or the [On/Off] key is pressed during the operation.
• When in the weighing mode, press [On/Off], the scale will show
“
0.000
” when the initial zero is within 4℅of the maximum capacity.
• The person to be weighed can step on to the platform now. The weight
will be display in Kg. or lb. depending on the units chosen by the user.
• If the weighing value is to be tared to obtain the net value, press the
[On/Off] key again.
• Press the [kg/lb] key for changing the weighing unit to kg or lb. An
arrow will indicate towards the chosen unit.
