Chapter 3 - Configuring the REX2
42 Campus-REX2 RS Interface Card User Manual
4 Enter any of the following:
• to access the previous screen of the table
• to access the next screen of the table
• to find a specific table entry; the user is prompted to specify a
MAC address for the destination device:
Required format is nn:nn:nn:nn:nn:nn
Enter Destination MAC Address:
• to display all entries in a table without pages; this provides you
the capability to capture this information to a file using a terminal
emulation software (such as HyperTerminal or ProComm)
• to refresh or update the table entries
• to clear all entries from the table
Viewing the ARP Table
The ARP table can be accessed through either the Bridge or the Router
configuration screens. An ARP table lists MAC addresses that are bound to
IP addresses. The ARP table can contain a maximum of 60 entries with a
fixed expiration time of 300 seconds. The ARP table entries are sorted by the
IP address.
1 From the Main Menu (page 1-14), type then press to access
the REX2 Configuration and Status screen. Either Bridge or Router can
be selected.
2 From the REX2 Configuration and Status screen, type then press
. Either the Bridge Configuration screen or Router Configuration
screen is displayed.
P
N
F
E
U
C
2 ENTER
4
ENTER
