ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 159
MODULES (E&M-8) > INFO > ASSEMBLY REVISION
Read security: 5
Displays the assembly revision of the module.
MODULES (E&M-8) > INFO > FIRMWARE REVISION
Read security: 5
Displays the current firmware revision of the selected module.
MODULES (E&M-8) > INFO > PROCESSOR ID
Read security: 5
Displays the processor ID of the selected module.
MODULES (E&M-8) > STATUS
Read security: 5
Displays the status of each of the eight E&M ports.
MODULES (E&M-8) > STATUS > PRT
Read security: 5
Displays the operating port number. There are eight available ports on the Octal E&M Option Module
MODULES (E&M-8) > STATUS > STATUS
Read security: 5
Displays the call status of each voice port. This field displays one of the following messages:
I
NACTIVE The port is pre-configured, but the E&M module is not present.
D
ISABLED The E&M module is present, but the port is not mapped.
U
NKNOWN Information about the port is not available.
I
DLE The selected trunk is configured but currently not in use.
E-L
EAD ASSERTED The E-Lead is asserted, indicating a far-end seizure.
M-L
EAD ASSERTED An M-Lead current has been detected, indicating a near-end seizure.
TO The port is configured for Transmission Only mode.
C
ALL IN PROGRESS Indicates there is a current, active call on the selected E&M port.
T
EST E-LEAD OPEN Forces an on-hook situation for testing purposes.
T
EST E-LEAD
CLOSED
Forces an off-hook situation for testing purposes.
T
EST Generic test indicator.
T
EST-UNKNOWN The port is in test mode, but additional information about the active test
is not available.
