61223424L2-5A Issue 1, December 2003 15
The System PM/Screen Report option (Figure 20)
offers four types of reports on performance monitoring.
Selecting a report type will then display all the reports
for that category on the screen at once, which is more
efficient than stepping through the menus individually.
The Clear PM and Alarm Histories screen (Figure 21)
initializes data from performance monitoring and alarm
histories. Selecting this option from the Main Menu
displays the prompt, “This will clear the history data for
all elements in the circuit. Are you sure (Y/N)?”
Figure 20. System PM/Screen Report Option
Figure 21. Clear PM and Alarm Histories
1. HDSL4 Unit Information
2. Provisioning
3. Span Status
4. Loopbacks and Test
5. Performance History
6. Scratch Pad, Ckt ID, Time/Date
7. Terminal Modes
8. Alarm History
9. Event History
10. System PM/Screen Report
11. Virtual Terminal Control
Selection: 10
Enable data logging now.
Select Report Type or Press Escape to cancel:
1) Full System/History Report
2) Current Status Report
3) System Configuration Report
4) Alarm/Event History
Circuit ID: 10/01/03 09:29:45
Adtran HDSL4 Main Menu
1. HDSL4 Unit Information
2. Provisioning
3. Span Status
4. Loopbacks and Test
5. Performance History
6. Scratch Pad, Ckt ID, Time/Date
7. Terminal Modes
8. Alarm History
9. Event History
10. System PM/Screen Report
11. Clear PM and Alarm Histories
12. Troubleshooting
13. Virtual Terminal Control
This will clear the PM, Alarm, Span Status, and
Troubleshooting Histories for all circuit elements.
Are you sure (Y/N)?
Selection: 11
