![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/f/af/faf4b71e-0d53-4dbf-94c2-20f067210226/faf4b71e-0d53-4dbf-94c2-20f067210226-bg6e.png)
Chapter 3: Terminal Menu Operation and Structure
61202.070L1-1 Express L128/L128T User Manual 93
Status/Bridge Table
Read security: 5
This lists the contents of the Express L128/L128T’s bridge table.
Bridge Cache/MAC Address - Ethernet address for device learned
Bridge Cache/Port - Port device learned from: LAN, WAN0, or WAN1
Bridge Cache/TTL - Seconds until address is removed from table
Status/IP Routes
Read security: 5
This lists the contents of the Express L128/L128T’s IP router table.
IP Routes /IP Address - Network or host destination address
IP Routes /Netmask - Network mask applied to the destination
address
IP Routes /Gateway - Host or router to receive this packet
IP Routes /Port - Port gateway is located on:
local - sent directly to the Express L128/L128T router
eth0 - Express L128/L128T’s ethernet port
wan0 - Express L128/L128T’s first PPP bundle
wan1 - Express L128/L128T’s second PPP bundle
idle - non-connected or “spoofed” route used for dial-on-demand
IP Routes /Use - Number of times the Express L128/L128T has
referenced the route
IP Routes/Flags - Important tags associated with this route entry
H - route is a host route
G - route is a gateway route
D - route learned dynamically from RIP
I - route learned from an ICMP redirect
P - route is private and is not advertised with RIP
T - route is to a triggered port (updates only when table changes)