PCA-6185 User’s Manual 72
Remarks:
1. Setting is valid only if Multiple LUN Support is enabled
2. Settings are valid only if host adapter BIOS is enabled.
7.6 Starting SCSISelect
Follow these steps to start SCSISelect:
1. Turn on or restart your system.
During the startup process, pay careful attention to the messages that
appear on your screen.
2. When the following message appears on your screen, press the
Ctrl-A keys simultaneously (this message appearsfor only a few
seconds):
Press <Ctrl><A> for SCSISelect (TM) Utility!
3. From the menu that appears, use the arrow keys to move the cursor
to the option you want to select, then press ENTER.
Note: If you have difficulty viewing the display, press F5 to
toggle between color and monochrome modes. (This
feature maye not work on some monitors.)
Exiting SCSISelect
Follow these steps to exit SCSISelect:
1. Press ESC until a message prompts you to exit (if you changed any
settings, you are prompted to save the changes before you exit.)
2. At the prompt, select YES to exit, then press any key to reboot the
computer. Any changes you made in SCSISelect take effect after
the computer boots.
Support Removable Disks
BIOS as Fixed Disks
2
Disabled
Boot only
All Disks
Disabled
BIOS Support for Bootable
CD_ROM
2
Enabled, Disabled Enabled
BIOS Support for Int 13
Extensions
2
Enabled, Disabled Enabled
