A SERVICE OF

logo

Open as PDF
next previous
Post-Repair Procedures ESG Family Signal Generators
Performance Tests
6-2 Service Guide
Performance Tests
The tables in this section list the performance tests that must be performed when a
speciļ¬c assembly is repaired or replaced. (Refer to the list below for the table that applies
to your signal generator.) Except where noted, all tests are automated using software. For
more information on performance tests, refer to the calibration guide.
For the ESG-A Series refer to Table 6-1 on page 6-3.
For the ESG-D Series refer to Table 6-2 on page 6-4.
For the ESG-AP Series refer to Table 6-3 on page 6-5.
For the ESG-DP Series refer to Table 6-4 on page 6-6.