- 9 -
6-2 6-3
Lift Control 1
[1] GTW-LC ID
[2] Select ON or OFF for the GTW-LC connection.
[3] Select N.O. or N.C. for the Output Type.
[4] Set the Timer. The time setting range is 1 to 600 sec. (one second
increments)
• Clicking the upper spin button will increase the time setting, and clicking the
lower spin button will decrease the time setting. At this time, a numerical value
exceeding either the upper or lower value limits cannot be set.
• The number of seconds can be input directly by clicking inside of the Timer
box.
• Input can be set by pressing the Enter key or by clicking inside of another Timer
box.
[5] After GT system settings are completed, the connected GTW-LC ID
numbers will display in black if the Check button is clicked while
connected to GT-BCX.
The system will be in use when Connecting status is being checked.
Checking connections is not possible while the system is in use.
Lift Control 2
[1] The resident information that has been entered will be displayed.
[2] Set which relay will activate in the corresponding GTW-LC for each
residence. The setting range is 1 to 20.
[1]
[2]
[3] [4]
[5]
[1] [2]
6-4
Data transfer
1. Select Export in the Connection menu.
2. If Y es is selected, the data will be transferred to GT-BCX.
1
2
