OPERATION
3109 01/11 Operation Section 4-3
© 2011 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 68” pin on bucket, external hydraulic system of 10 GPM with engine operating at 2600 RPM
and relief setting of 2500 PSI.
Horsepower Range 30-50 HP
System pressure/flow rate 2500 PSI/ 10 GPM
Lift Capacity to maximum height 1320 lbs.
Breakout force at pivot pin 4410 lbs.
Rollback force at ground line 3030 lbs.
Total weight with bucket (approx.) 980 lbs.
Raising time to full height 4.97 seconds
Lower time 3.42 seconds
Attachment dump time 2.47 seconds
Attachment rollback time 3.19 seconds
Hydraulic system flow 10 GPM
System pressure at rated flow 2500 PSI
(A) Maximum Lift Height at Pivot Pin 111”
(B) Maximum Height Under Bucket 107
(C) Clearance with Bucket Dumped 93”
(D) Reach at Maximum Height 24”
(E) Maximum Dump Angle 42°
(F) Reach with Attachment on Ground 62”
(G) Attachment Rollback Angle 20°
(H) Digging Depth 5.5”
(I) Overall Height in Carry Position 56” @ top of upright
(Manufacturers estimated specifications and design subject to change without notice.)
