2323
2323
23
3.3.23.3.2
3.3.23.3.2
3.3.2
Chipset ConfigurationChipset Configuration
Chipset ConfigurationChipset Configuration
Chipset Configuration
Max CPUID Value Limit
Ratio Actual Value
This is a read-only item, which displays the ratio actual value of this
motherboard.
CPU Thermal Throttling
You may select [Enabled] to enable P4 CPU internal thermal control mecha-
nism to keep the CPU from overheated.
Hyper Threading Technology
To enable this feature, it requires a computer system with an Intel Pentium
®
4
processor that supports Hyper-Threading technology and an operating sys-
tem that includes optimization for this technology, such as Microsoft
®
Win-
dows
®
XP. Set to [Auto] if using Microsoft
®
Windows
®
XP, or Linux kernel
version 2.4.18 or higher. This option will be hidden if the installed CPU does
not support Hyper-Threading technology.
For Prescott CPU only, some OSes (ex. NT4.0) cannot handle the function
with disable. This should be enabled in order to boot legacy OSes that cannot
support CPUs with extended CPUID functions.
of this motherboard. If it shows “Locked”, then the item Ratio CMOS Set-
ting will be hidden. If you use the ratio value to time the CPU frequency, it will
be equal to the core speed of the installed processor.
Bypass Access
This technology can provide users with the function of increasing the sys-
tem performance. The default value is [Disabled]. It will only work when you
use FSB800 CPU and DDR400 DRAM at the same time; otherwise, this option
will be hidden.
BIOS SETUP UTILITY
v02.54(C)Copyright 1985-2003, American Megatrends, Inc.
Chipset Configuration
DRAM Frequency
BypassAccess
Flexibility Option
Configure DRAM Timing by SPD
DRAM CAS# Latency
DRAM RAS# Precharge
DRAM RAS# to CAS# Delay
DRAM Precharge Delay
DRAM Burst Length
MemoryHole
Init. Graphic Adapter Priority
GraphicsApertureSize
OnBoard LAN
OnBoard AC'97 Audio
[Off]
[Disabled]
[Disabled]
[Auto]
[4 Clocks]
[4 Clocks]
[8 Clocks]
[4]
[Disabled]
[PCI/AGP]
[64MB]
[Enabled]
[Auto]
[Auto]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
F9 Load Defaults
Options
133MHz (DDR266)
166MHz (DDR333)
200MHz (DDR400)
Auto
Advanced
