1919
1919
19
connect to the SATA HDD
power connector
connect to the
power supply
Serial ATA (SATA) Please connect the black end of
Power Cable SATA power cable to the power
(Optional) connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
USB 2.0 Headers Besides six default USB 2.0
(9-pin USB6_7) ports on the I/O panel, there are
(see p.10 No. 14) two USB 2.0 headers on this
motherboard. USB6_7 header can
support two USB 2.0 ports, and
USB8 header can support one
(4-pin USB8) USB 2.0 port.
(see p.10 No. 13)
WiFi Header This header supports WiFi+AP
(11-pin WIFI) function with ASRock
(see p.10 No. 25) WiFi-802.11g or WiFi-802.11n
module, an easy-to-use wireless
local area network (WLAN)
adapter. It allows you to create a
wireless environment and enjoy the
convenience of wireless network
connectivity.
USB_P WR
USB_P WR
P +7
P-7
P +6
P-6
GND
GND
DUMMY
1
1
USB_PWR
P-8
P+8
GND
1
USB+5V_2
NC
NC
GND1
NC
+3SVB
USB+5V_1
D0-
D0+
GND1
PME#
If you don’t plan to use WiFi+AP function on this motherboard, this header can be
used as a 4-Pin USB 2.0 header to support one USB 2.0 port. To connect the
4-Pin USB device cable to this header, please refer to this
picture for proper installation.
CD-L
GND
GND
CD-R
CD1
Internal Audio Connectors This connector allows you
(4-pin CD1) to receive stereo audio input
(CD1: see p.10 No. 23) from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
Infrared Module Header This header supports an
(5-pin IR1) optional wireless transmitting
(see p.10 No. 21) and receiving infrared module.
DUMMY
GND
+5V
IRTX
IRRX
1
