4. OSD Operation
23
(Continued from previous page.)
Setting Function
SCAN MODE Selects which Ports are available for scanning. There are six
choices:
ALL - All the Ports which have been set Accessible (F5)
QVIEW - Only those Ports which have been set Accessible
(F5) and have been selected for Quick View Scanning (F7)
POWERED ON - Only those Ports which have been set
Accessible (F5) and are Powered On
POWERED ON + QVIEW - Only those Ports which have
been set Accessible (F5) and have been selected for Quick
View Scanning (F7) and are Powered On
QVIEW + NAME - Only those Ports which have been set
Accessible (F5) and have been selected for Quick View
Scanning (F7) and have been named (F2)
NAME - Only those Ports which have been set Accessible
(F5) and have been named (F2).
SCAN DURATION Determines how long the display dwells on each port when it
cycles through the selected ports in Quick View Scan Mode.
Key in a value from 1–255 seconds, then press [Enter].
Default is 3 seconds.
PRIVATE MODE The [Enter] key is a toggle that enables/disables Private
Mode for the currently selected port. When Private Mode is
enabled, the other Console cannot access the port, and its
monitor shows a blank screen with a P symbol displayed in
front of the Port ID to indicate Private Mode. When you have
finished making your selections, press [Esc] to return to the
OSD Main Menu.
RESTORE DEFAULT
VALUES
This function is used to undo all User changes and return the
setup to the original factory default settings except for the
Names that were assigned to Ports, which are retained.
MOUSE BUTTON
SETUP
This function allows you to set the mouse for right or left
handed operation. Use [Enter] to toggle between the two.
