- 17 -
Hotkey Summary Table
Selected LED Display
Combination Action
CS-82A [LCtrl] [LCtrl] or [RCtrl]
[RCtrl]
Toggles access between the two
computers (default).
[Scroll Lock] [Scroll Lock] Toggles access between the two
computers (alternate).
[LShift] [RShift] Starts Auto Scan Mode. Key in a
number from 1 to 4 to set the scan
interval.
[Spacebar] Exits Auto Scan Mode.
CS-84A [Alt+Ctrl+Shift] [Port ID]
[Enter]
Brings the KVM focus to the computer
attached to the port corresponding to
the specified Port ID.
[Alt+Ctrl+Shift] [0] [Enter] Starts Auto Scan Mode
[Alt+Ctrl+Shift] [9] [Enter] Invokes Last/Next Mode
[LCtrl] + [LCtrl] Brings the focus to the previous
computer.
[RCtrl] + [RCtrl] Brings the focus to the next computer.
Activity Meaning
Off Port is not selected.
On (Steady) Port is connected to an active computer.
Flashing (On and Off
equal)
Port is connected to an active computer and is being
accessed in Auto Scan Mode.
Flashing (On long; Off
short)
Port is connected to an active computer and is being
accessed in Last/Next Mode.
