Chapter 3. Operation
17
Read Command
The Read command allows you to read information about the VS0102 /
VS0104 / VS0108.
The formula for the Read commands are as follows:
Read Command + Output Command + Port Number + Control Command
[Enter]
For example, to display the firmware version for the device, input the
following:
read version [Enter]
For example, to display the video on/off status for port 03, input the following:
read o03 video [Enter]
The following tables show the possible values and formats for the Output
Command, Port Number, and Control command:
Note: Each command can be separated with a space.
Command Description
read Read information from device
Output Command Description
o Output command
Port Number Description
yy 01-08 port (default is 01)
* All ports
Control Description
version Read firmware version
edid Read EDID information
(For port 01 only)
video Read video on/off status
audio Read audio on/off status
