PANEL DESCRIPTIONS
2
1. Front Panel
switcher is powered ON
to indicate which video source is present on the input.
Front Panel Operation Example
Press < Select > push button till desired channel is displayed, then press < Set > push button to con-
Without pressing < Set
Channel 1
When connecting the AT-COMP-88M, send inputs to desired signals
Next, switch the power switch to <On> and you should see and hear the signals on the devices you
have connected to the various output connectors of this unit.
2. Rear Panel
1. Power Input
DC Jack - inner OD O 2.1mm (+)
Outside OD O 5.5mm (GND)
Power input - 12VDC, 2A
DB-9pin Female connector
AT-COMP-88M
8x8 COMPONENT VIDEO/AUDIO
MATRIX SWITCHER
4 32 1
