Avaya, Inc. - 50 - PARTNER ACS 1600 DSL module User Guide
2. Modify Existing DLCI
Type the DLCI number, press ENTER, and then
choose a command from the FR Encapsulation
Configuration submenu.
1. RAW (No Encapsulation)
2. Proprietary Voice DLCI
3. RFC 1490
4. ATM RFC 1483 (Tunneling)
Select your choice, and then choose a command from
the FR DLCI Options submenu.
1. Configure Transmit CIR
Follow the on-screen messages to enter the
following information.
Questions below may or not display, depending
on the options that you select.
• Transmit Committed Information Rate
(CIR)
• Committed burst size (Bc)
• Circuit Throughput
• Excess burst size (Be)
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt. To accept this
value, press ENTER.
2. Configure Receive CIR
Follow the on-screen messages to enter the
following information. Questions below may or
not display, depending on the options that you
select.
• Receive Committed Information Rate
(CIR)
• Committed burst size (Bc)
• Circuit Throughput
• Excess burst size (Be)
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt. To accept this
value, press ENTER.
