6
Upgrading an Existing G700 with an S8300 — R2.0 to R2.x
Task Summary
Installation and Upgrades for G700 and S8300 265
December 2003
G700 Manual Upgrade Tasks
G700 Pre-Upgrade Tasks
• Verify the Contents of the tftpboot Directory on page 291
• Determine Which Firmware to Install on the G700 on page 292
G700 Upgrade Tasks
•
Install New Firmware on the P330 Stack Processor on page 293
• Install New Firmware on the G700 Media Gateway Processor on page 294
• Install New Firmware on the Media Modules on page 295
• Install New Firmware on Other G700 Media Gateways on page 297
Post-upgrade Tasks
• Check Media Modules on page 298
• Enable Scheduled Maintenance on page 298
• Busy Out Trunks on page 298
• Check for Translation Corruption on page 298
• Resolve Alarms on page 298
• Re-enable Alarm Origination on page 298
• Back up the System on page 299
• Restart LSPs (if any) on page 299
