30
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the
following troubleshooting. If the problem persists, please contact your
local dealer or our service center.
Problem: No image appears on screen.
• Check that all the I/O and power connectors are correctly and
well connected as described in the “Installation” section.
• Make sure the pins of the connectors are not crooked or
broken.
Problem: Partial image or incorrectly displayed image.
• Check to see if the resolution of your computer is higher than
that of the LCD Display.
• Reconfigure the resolution of your computer to make it less
than or equal to the native resolution (1920 x 1200).
Problem: Image has vertical flickering line bars.
• Use “Clock” to make an adjustment.
• Check and reconfigure the display mode of the vertical refresh
rate of your graphics card to make it compatible with the LCD
Display.
Problem: Image is unstable and flickering
• Use “Phase” to make an adjustment.
