A SERVICE OF

logo

8
Belkin Enclosure - User Manual v 1.0.0ek P74789ec
Leveling your Enclosure
1. Move your Enclosure to it’s final location.
2. Once in place use your 3/4” (19mm) wrench to lower the
adjustable levelers so that the weight of the Enclosure is
taken off of the casters.
3. Using a level and your wrench, adjust the levelers so that
your Enclosure is level.
Removing your Casters and Levelers
The following steps require two or more people.
1. Using two or more persons, lay your Enclosure on it’s side.
2. Unscrew the levelers
3. Using a 1/2” (13mm) hex socket, remove the 5/6” (21mm) nuts holding the casters
4. Return Enclosure to upright position.
Installing your Belkin Enclosure