A SERVICE OF

logo

2322
Manually Configuring your Router
2322
Setting your ISP Connection Type to Classical IP over ATM (CLIP)
IP Address – Enter the WAN IP address provided by your ISP.
Subnet Mask – Enter a subnet mask provided by your ISP.
Default Gateway – Enter a default gateway IP address. If the Router
cannot find the destination address within its local network, it will
forward the packets to the Default Gateway (assigned by your ISP).
Primary DNS Server – Enter the primary DNS server’s IP address
provided by your ISP.
Secondary DNS Server – Enter the secondary DNS server’s IP
address provided by your ISP.
VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here (assigned by your ISP).
Setting your ISP Connection Type to Network Bridging
Enter the VPI/VCI value in the provided spaces. Click “OK” to activate
your settings.