Bell U760 Manual

next previous

Saving ﬁles to microSD

TheprocessofsavinglestothemicroSDmemorycardonyour

TurboStickissimilartosavinglestoanyexternalashdriveonyour

computer.

Saving ﬁles from an application:

1. InserttheTurboStickintoyourcomputer’sUSBport.

2. ThecomputerwilldetectnewhardwareandtheUnplug/Ejecticon

will appear in the taskbar.

3. Go to File > Save As.

4. ClickthedownarrowwithintheSave in box to view the contents of

the pull-down menu.

5. SelecttheTurboStickwhichappearsasadriveletterforMass

Storage or Removable Storage (e:\, f:\, g:\, etc.)

6. TypeanamefortheleyouaresavingtotheTurboStickandclick

Save.

Lanyard & keychain:

The lanyard & keychain is a convenient accessory that gives you

maximum portability while on the go.

Afﬁxing the lanyard or keychain to the Turbo Stick:

1. Remove the cap and locate the lanyard hook on the Turbo Stick and

on the cap.

2. Pinchtheloopedthreadonthelanyardorkeychainandinsertthetip

of the thread into the hook hole on the cap and through the Turbo Stick,

pushing the thread until it exits on the other side of the hook hole.

3. PushthecapontheTurboStickandinserttheendofthelanyardor

keychainthroughtheloop.Pulltotighten.