A SERVICE OF

logo

Open as PDF
next previous
SkyRider 15
4-4
Figure 4-3. Rear Casters Lubrication
3. See Figure 4-3. Grease rear caster axles and swivel bolts at the grease fittings
provided. Add about 1/2 ounce of clean #2 NGLI grease to each fitting.
4. Remove, clean, and lubricate steering linkage and pothole guard linkage bolts
with wheel bearing grease.
5. Apply about 1/2 ounce of clean #2 NGLI grease to the fitting on each front
wheel pillow block, Figure 4-4. Do not over-grease the pillow block bearings.
Figure 4-4. Front Caster Pillow Blocks Lubrication