Camera Browser Interface Recording | en 53
Bosch Security Systems Software manual AM18-Q0611 | v5.50 | 2012.03
2. Click Set to activate all media in the Managed storage
media list.
– The Status column shows all media as Online.
3. Check the box in the Rec. 1 or Rec. 2 column to specify the
recording tracks to be recorded on the target selected.
4. Check the Recording 1 or Recording 2 boxes for the
Overwrite older recordings option to overwrite the older
recording tracks once the available recording capacity has
been used.
Note:
If older recordings are not allowed to be overwritten when the
available memory is full, the recording in question is stopped.
Specify limitations for overwriting old recordings by configuring
the retention time.
10.1.4 Formatting storage media
All recordings on a storage medium can be deleted at any time.
Check the recordings before deleting and back-up important
sequences on the computer's hard drive.
1. Click a storage medium in the Managed storage media list
to select it.
2. Click Edit below the list.
3. Click Format in the new window to delete all recordings in
the storage medium.
4. Click OK to close the window.
10.1.5 Deactivating storage media
A storage medium in the Managed storage media list can be
deactivated. It is then no longer used for recordings.
1. Click a storage medium in the Managed storage media list
to select it.
2. Click Remove below the list. The storage medium is
deactivated and removed from the list.
